Technical Analyses Component Audit Plans & Pricing Sign In
Upgrade to Pro
15x 1.46" (37mm) Screws & 1.5" (38mm) Anchors H2760
Tools & Home Improvement > Hardware > Fasteners > Screws > Machine Screws

15x 1.46" (37mm) Screws & 1.5" (38mm) Anchors H2760

Brand: Generic / OEM • Audited BOM: 2 Components
Observed Retail See Benchmarks
China Factory FOB $ ••.•• 🔒 FOB
US Landed Margin ••% 🔒 Margin

🛠️ Troubleshooting Guide & Return Mitigation

Verified Self-Service Base

Practical guide for the 15x 1.46" (37mm) Screws & 1.5" (38mm) Anchors H2760 Kit: correct usage, damage prevention, and common troubleshooting for secure fastenings.

RMA Prevention Tags: #improper_tool_use #wrong_anchor_selection #fastener_overload #incomplete_installation
🔍 Colloquial Consumer Search Queries:
“screw won't hold” “anchor broke” “fastener kit not working” “wrong screw and anchor size” “how to install anchor screw”

🚀 Quick Start & Safe Operation Guide

1
Select the installation location and verify the wall is suitable for anchors (masonry).
🔒 +3 Detailed Operational Steps Locked in Torfus Pro
Unlock Steps

⚡ Easy DIY Troubleshooting & Common Fixes

🔧
Screw won't tighten or feels loose in the anchor.
prob_01
Common root cause: Hole in the wall is too large for the anchor, or the anchor is not fully inserted.
Step-by-step solution: Remove the screw and anchor. Try inserting the anchor again, ensuring it is seated properly. If the hole is too large, you may need to use a larger diameter anchor or a filler material.
💡 Pro tip: Always test the anchor in the hole before screwing in the item. If it's loose, re-drill the hole with the correct bit size.
📸 Evidence to provide support: Clear photo of anchor in wall and screw attempting to tighten.
🔒
+2 Exclusive Verified Technical Solutions Locked
Engineering diagnostics for mechanical jams, thermal overloads, and seal failures available in the Full Dossier.
Unlock Full Guide

🚫 What NEVER to Do (Common Misuse Warnings)

⚠️ Using the wrong drill bit size for the anchor hole.
err_01
Consequence: Hole is too large (loose anchor) or too small (anchor breaks upon insertion).
✓ How to avoid: Always use a 7.5mm (approx. 0.3 inch) drill bit for the 38mm x 7.5mm anchors included in the kit.
🔒 +2 Critical Misuse Warnings Locked
Engineering alerts to prevent motor burnout, voided manufacturer warranty, and catastrophic component breakdown.
View All Warnings

⚙️ Hardware Setup, Adjustments & FAQs

❓ What is the difference between the 37mm x 4mm screw and the 38mm x 7.5mm anchor? cfg_01
The screw is 37mm (approx. 1.46 inches) long and 4mm (approx. 0.16 inches) in diameter. The anchor is 38mm (approx. 1.5 inches) long and has an outer diameter of 7.5mm (approx. 0.3 inches). The anchor is inserted into the wall, and the screw is threaded into it to secure the item.
🔒 +1 Hardware Setup & Calibration FAQs Locked in Torfus Pro Unlock
⚖️

⚖️ Seller Warranty & Marketplace Dispute Conciliation

Contact support if, after correct use according to instructions, the kit exhibits manufacturing defects in the screws (e.g., factory-stripped threads, brittle material) or anchors (e.g., cracks without excessive force applied). This covers defects that prevent normal product use under the seller's warranty and marketplace return policy.