Electronics > Security & Surveillance > Surveillance Accessories > Surveillance Cables
328 ft (100m) Flexible BNC Siamese Coaxial Cable with Power, 80% Shield
Brand: Generic / OEM
•
Audited BOM: 6 Components
🛠️ Troubleshooting Guide & Return Mitigation
Verified Self-Service BaseQuick guide for BNC coaxial cable with power: proper installation, common troubleshooting, and damage prevention for stable image and power.
RMA Prevention Tags:
#careful_installation
#environmental_protection
#connector_check
#full_initial_test
🔍 Colloquial Consumer Search Queries:
“bnc cable with power not working”
“static on bnc cable camera”
“328ft (100m) coaxial cable defect”
“how to install bnc cable with power”
“corroded bnc connector issue”
🚀 Quick Start & Safe Operation Guide
1
Firmly connect the BNC connector to the camera and DVR/NVR, ensuring a proper fit.
🔒
+3 Detailed Operational Steps Locked in Torfus Pro
Unlock Steps
⚡ Easy DIY Troubleshooting & Common Fixes
🔧
prob_01
Fuzzy or horizontal lines on image.
Common root cause: Electromagnetic interference (EMI/RFI) due to insufficient shielding or power cables running too close to the video cable.
Step-by-step solution: 1. Move the coaxial cable away from interference sources (electrical wires, motors). 2. Ensure BNC connectors are tight and secure.
💡
Pro tip: When routing the cable, avoid running it parallel to power cables or noise sources. Use cable ties to maintain separation.
📸
Evidence to provide support: Clear close-up photo of BNC connectors and cable path near interference sources.
🔒
+3 Exclusive Verified Technical Solutions Locked
Engineering diagnostics for mechanical jams, thermal overloads, and seal failures available in the Full Dossier.
Unlock Full Guide
🚫 What NEVER to Do (Common Misuse Warnings)
⚠️ Bending the cable at excessively sharp angles (less than 4 times the cable diameter).
err_01
Consequence: Internal conductor or shielding mesh breakage, causing signal loss or fuzzy images.
✓ How to avoid: Always respect the minimum bend radius specified for coaxial cables to prevent mechanical stress.
🔒 +2 Critical Misuse Warnings Locked
Engineering alerts to prevent motor burnout, voided manufacturer warranty, and catastrophic component breakdown.
View All Warnings
⚙️ Hardware Setup, Adjustments & FAQs
🔒 +2 Hardware Setup & Calibration FAQs Locked in Torfus Pro
Unlock
⚖️
⚖️ Seller Warranty & Marketplace Dispute Conciliation
Contact the seller for warranty service if, after following all troubleshooting and verification steps, the cable exhibits persistent video signal or power failure, or if the BNC and power connectors show manufacturing defects (such as internal poor contact or brittle material) not caused by misuse or improper installation. Refer to the seller's warranty and marketplace return policy.